• P5.2.6 BALANCE ID
Enables printing out balance ID number.
• P5.2.7 USER
Enables printing out the name of a logged-in user.
• P5.2.8 PRODUCT
Enables printing out the name of a selected product.
• P5.2.9 VARIABLE 1
Enables printing out the value of VARIABLE 1.
• P5.2.10 VARIABLE 2
Enables printing out the value of VARIABLE 2.
• P5.22.11 EMPTY LINE.
Enables printing out an empty separating line.
• P5.2.12 CAL. REPORT
Enables printing out a report from the last adjustment, according to the
settings declared for the adjustment report printout (see sec. 12.1 in this
manual).
• P5.2.13 NSTD. PRINT.
Enables printing out one of the four non-standard printouts on the header
printout.
You can choose one from the following options: NONE / NSTD. PRN 1 /
NSTD.PRN.2/NSTD.PRN. 3 / NSTD. PRN.4
The way of entering non-standard printouts is described further in this manual.
For the parameters described above i.e. P5.2.1 to P5.2.12 you should choose
from:
NO - do not print in the header
YES - print in the header
For the parameter P5.2.13, you should choose one of the following options:
NONE / NSTD.PRN. 1 / NSTD. PRN 2 / NSTD.PRN 3 / NSTD. PRN.4
To Next Page
Loading...
Need help?
General
