• P5.4.6 USER
Enables printing out the name of a logged-in user.
• P5.4.7 PRODUCT
Enables printing out the name of a selected product.
• P5.4.8 VARIABLE 1
Enables printing out the value of VARIABLE 1
• P5.4.9 VARAIBLE 2
Enables printing out the value of VARIABLE 2
• P5.4.10 DASHES
Enables printing out a line of separating dashes
• P5.4.11 EMPTY LINE
Enables printing out an empty separating line
• P5.4.12 CAL. REPORT
Enables printing out a report from the last adjustment, according to the
settings declared for the adjustment report printout (see sec. 12.1 in this
manual).
• P5.4.13 SIGNATURE
Enables printing out the signature of the user performing the weighments.
• P5.4.14 NSTD. PRNT.
Enables printing out one of the four non-standard printouts on the header
printout.
You can choose one from the following options: NONE / NSTD. PRN 1 /
NSTD.PRN.2/NSTD.PRN. 3 / NSTD. PRN.4
The way of entering non-standard printouts is described further in this manual.
For the parameters described above P5.4.1 to P5.4.13 you should choose from:
NO - do not print in the footer
YES - print in the footer
For the parameter P5.4.14, you should choose one of the following options:
NONE / NSTD.PRN. 1 / NSTD. PRN 2 / NSTD.PRN 3 / NSTD. PRN.4
To Next Page
Loading...
Need help?
General
