• Zatwierdzić wybraną liczność próbki, zostanie wyświetlony komunikat
<PLACExx PCS>.
• Place the declared number of pieces in the container and when the
result is stable (the symbol
is displayed) and confirm their mass by
pressing button,
• The balance software automatically counts a single sample mass and
enters the mode <COUNTING PIECES> displaying the number of
pieces which are on the pan (pcs). In the bottom line, a single sample
mass value is shown (if the option for the function
<INFORMATION>has been selected).
CAUTION:
It should be remembered that:
To Next Page
Loading...
Need help?
General
