ON/OFF key enables switching on and off balance’s display.
If switched off balance components other than the display are
powered, and balance is in stand-by mode.
F key. Function key, which enables quick entering the
settings of an active working mode.
MODE key for selecting balance’s working mode.
UNITS key, changes measuring units.
PRINT/ENTER key - Sends current display status to a
peripheral device (PRINT) or accepts selected value of a
parameter or function (ENTER).
ESC/ZERO/TARE key – zeroing / tarring of balance’s
indication.
Adjustment – function key of immediate initiating the
adjustment / calibration process.
Function key for entering the main menu of a balance.
Navigating arrows for moving in balance’s menu or changing
parameter value
II
The marker of second weighing range.
To Next Page
Loading...
