RADWAG PS Series User Manual

87
20. ADDITIONAL EQUIPMENT
20.1 Anti-Vibration table
It is a very stable basis which eliminates all kinds of vibrations and
ground shakes. The inner part of the table holds a marble plate,
which is a foundation for balance positioning.
20.2. Rack for under hook weighing
The rack is used if under hook weighing option has to be applied.
Under hook weighing is necessary if magnetic loads are weighed
or during density determination of substances. Racks are also
used for measuring absorptiveness of substances e.g. foamed
polystyrene. The rack is made of mild steel. Rack height is
330mm.
20.3. Density determination kit (for solids and liquids)
It is applicable with balance with resolution at least 1 mg.
Designed for density determination of solids and liquids. The
procedure is fully automatic, i.e. the user only places samples
on kit’s weighing pans.
20.4. Additional display
Features: Length of conductor between additional display and
balance – 1,5m, plastic casing, possibility of tilting the additional
display head.

RADWAG PS Series Specifications

General

Category	Scales
Brand	RADWAG
Series	PS
Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Display	LCD
Housing	Plastic
Repeatability	Varies by model
Linearity	Varies by model
Calibration	Internal or external
Interface	RS232
Power Supply	100 - 240V AC
Operating Temperature	+15 ÷ +30 °C
Weighing Unit	g, lb, oz