RADWAG PS Series User Manual

86
19. ERROR MESSAGES
Er1 Hi - mass out of range on balance start and adjustment
Er2 nuLL - value from AD converter ≤ 0 (A/D ≤ 0)
Er3 FuL1 - values from A/D converter ≥ maximal converter range (A/D ≥ 0)
Er4 FuL2 – maximal capacity of the balance exceeded (over load)
Er5 rout – mass value out of range (during adjustment, determining reference for
sample quantity and percent setup, etc.),
Er7 tout - timeout error for zeroing and tarring
Er8 outr - enter value (from keyboard level) out of range (setting thresholds / limits
values)
Er9 Lock – function blocked (e.g. by LFT),
Er10 cal – adjustment error (change of mass or incorrect mass of adjustment
weight / mass standard).

RADWAG PS Series Specifications

General

Category	Scales
Brand	RADWAG
Series	PS
Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Display	LCD
Housing	Plastic
Repeatability	Varies by model
Linearity	Varies by model
Calibration	Internal or external
Interface	RS232
Power Supply	100 - 240V AC
Operating Temperature	+15 ÷ +30 °C
Weighing Unit	g, lb, oz