Return to weighing
14.4. Working mode FiLL
Working mode FiLL enables two settings:
FiLL = NO – mode disabled, i.e. not available in the working modes.
FiLL = YES – mode enabled, i.e. available in the working modes.
If FiLL is enabled, then the balances operates with settings, that are stored in
balance’s settings as default and ensuring quicker operation. The settings
automatically decrease Autozero range to 1 reading interval. Mode activation is
signaled by a black triangle pictogram visible on display’s right hand side (and
above the measuring unit). Working mode FiLL is set to YES as default, thus it is
accessible in the working modes. The mode can be disabled from the working
modes by setting it to NO. To disable FiLL mode enter menu of available modes –
see point 9.3.2 of this user manual.
To Next Page
Loading...
