RADWAG PS Series User Manual

46
12.3. Adjustment test
12.3.1. Balances with internal adjustment
Adjustment test is a comparison of internal adjusting weight with its value
stored in balance’s memory. This process is automatic and its result is
shown on the display (if a balance is connected to a computer or a printer
through RS 232 socket, data on adjustment test is printout). Press
ESC/TARE key to return to previous display.
Return to weighing
(see point – 8.2. Return to weighing).

RADWAG PS Series Specifications

General

Category	Scales
Brand	RADWAG
Series	PS
Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Display	LCD
Housing	Plastic
Repeatability	Varies by model
Linearity	Varies by model
Calibration	Internal or external
Interface	RS232
Power Supply	100 - 240V AC
Operating Temperature	+15 ÷ +30 °C
Weighing Unit	g, lb, oz