Return to weighing:
15. RS 232 FUNCTIONS
P4 Print
P4.1 bAud | 4800
P4.2 CntA | YES
P4.3 CntB | YES
P4.4 rEPl | YES
P4.5 PStb | YES
P4.6 Lo | 0.005
P4.1 bAud - baud rate setting (speed of transmission)
P4.2 CntA - continuous data transmission in basic measuring unit
P4.3 CntB - continuous data transmission in current measuring unit
P4.4 rEPl - setting operation mode for RS 232 output (manual / automatic)
P4.5 PStb - stable / unstable measurement for RS 232 transmission
P4.6 Lo - minimal mass required for activation of automatic printout
To Next Page
Loading...
