RADWAG PS Series User Manual

47
12.3.2. Balances with external adjustment
It is mass comparison of external adjustment weight with its value stored in
balance’s memory during adjustment process. This process is automatic
and its result is shown on the display (if a balance is connected to a
computer or a printer through RS 232 socket, data on adjustment test is
printout). Press ESC/TARE key to return to previous screen.
Return to weighing
(see point – 8.2. Return to weighing).

RADWAG PS Series Specifications

General

Category	Scales
Brand	RADWAG
Series	PS
Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Display	LCD
Housing	Plastic
Repeatability	Varies by model
Linearity	Varies by model
Calibration	Internal or external
Interface	RS232
Power Supply	100 - 240V AC
Operating Temperature	+15 ÷ +30 °C
Weighing Unit	g, lb, oz