RADWAG PS Series User Manual

36
11.1. Backlight of weighing result (display backlight)
OFF – backlight disabled
On – backlight enabled
Aut – backlight disabled automatically if weighing result does not
change within10 seconds.
Return to weighing
(see – 8.2. – return to weighing).
CAUTION:
Balance software has implemented option of automatic backlight switch off
bl = Aut. In case of this setting, the backlight is switched automatically off if
weighing results does not change within 10 seconds. Backlight is automatically
activated at the moment of weighing result change on balance display.
11.2. Adjusting display brightness

RADWAG PS Series Specifications

General

Category	Scales
Brand	RADWAG
Series	PS
Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Display	LCD
Housing	Plastic
Repeatability	Varies by model
Linearity	Varies by model
Calibration	Internal or external
Interface	RS232
Power Supply	100 - 240V AC
Operating Temperature	+15 ÷ +30 °C
Weighing Unit	g, lb, oz