RADWAG PS Series

19
P5 Unit [Measuring units]
P5.1 StUn | g/mg/kg/ct/lb/oz/ozt/dwt/t/mom/G [basic measuring units – e.g.
gram]
P5.2 mg | YES/no [mg – milligram]
P5.3
└
g | YES/no [kg – kilogram
P5.4 Ct | YES/no [ct – carat]
P5.5 lb | YES/no [lb – pound]
P5.6 oZ | YES/no [oz – ounce]
P5.7 oZt | YES/no [ozt – troy ounce]
P5.8 dwt | YES/no [dwt – pennyweight]
P5.9 t | YES/no [t – tael]
P5.10 nno | YES/no [mom - momme]
P5.11 G | YES/no [gr – grain]
P6 Func [Functions]
P6.1 FFun | ALL/PcS/HiLo/PrcA/Prcb/d_Co/d_Li/Add/FiLL
[selection of working modes]
P6.2 PcS | YES/no [parts counting]
P6.3 HiLo | YES/no [checkweighing]
P6.4 PrcA | YES/no [percent setup with reference to
weighed standard]
P6.5 Prcb | YES/no [percent setup with reference to
declared standard]
P6.6 d_Co | YES/no [density determination of solids]
P6.7 d_Li | YES/no [density determination of liquids]
P6.8 Add | YES/no [totalizing]
P6.9 Fill | YES/no [working mode FiLL]
P7 othEr [Other functions]
P7.1 bL | On/Aut/OFF [display backlight]
P7.2 bLbA | no/20/30/40/50/60/70/80/90/100 [display brightness]
P7.3 bEEP | On/OFF [beep sound on pressing keys]
P7.4 PrnS | [printout of balance parameters]