RADWAG PS Series

To Next Page

To Previous Page

If for instance PcS mode is selected, follow procedure in accordance with point

14.1 point, to return to weighing:

Press Esc/TARE key, balance returns to weighing.

Main Page

Default Chapter3
- Table of Contents3
1 Technical Data7
2 Basic Information9
- Intended Use9
- Inappropriate Use9
- Warranty9
- Monitoring the Metrological Parameters of the Instrument10
- Data Included in this User Manual10
- Staff Training10
3 Transport and Storage10
- Delivery Check10
- Packaging10
4 Unpacking, Assembling and Startup11
- Assembling and Place of Use11
- Unpacking11
- Leveling13
- Standard Equipment of a Balance13
- Cleaning13
- Plugging to Mains13
- Connecting Peripheral Devices13
5 Basic Functions14
6 Keyboard15
7 Start-Up16
8 User Menu17
- Moving through User Menu17
- Moving through User Menu20
9 Weighing21
- Selection of Basic Measuring Unit22
- Temporary Measuring Unit23
- Setting Accessibility of Balance Working Modes24
  - Selection of Working Modes Available for a User25
  - Means of Selecting One of Available Working Modes27
- Dual Range Balance (PS 200/2000/C)28
10 Balance Main Parameters29
- Setting Level of Filtering29
- Value Release31
- Autozero Function32
- Blanking of the Last Digit on the Display33
- Weighing Mode RAPID34
11 Other Parameters35
- Backlight of Weighing Result (Display Backlight)36
- Adjusting Display Brightness36
- Beep" Sound - Reaction on Pressing Function Key38
- Printout of All Balance Parameters through RS 232 Port39
12 Balance Adjustment40
- Internal Adjustment41
- Menu Adjustments Settings42
- Adjustment Test46
  - Balances with Internal Adjustment46
  - Balances with External Adjustment47
- Manual Adjustment48
  - Internal Adjustment48
  - External Adjustment49
- Adjustment Report Printout50
13 Determining Content of a Printout for Glp Procedure51
14 Balance Working Modes55
- Parts Counting of the same Mass56
- Checkweighing (Hilo) with Reference to Set Standard59
- Percent Setup62
  - Reference Mass Determined by Weighing63
  - Reference Mass Inserted to Balance Memory by a User64
- Working Mode Fill65
- Density Determination of Solids and Liquids67
  - Testing Thickness Solids68
  - Testing Thickness of Liquid68
- Totalizing69
15 Rs 232 Functions71
- Baud Rate72
- Continuous Transmission73
  - Continuous Transmission in Basic Measuring Unit73
  - Continuous Transmission in Current Measuring Unit74
- Setting Operation Mode for RS 232 Interface75
- Determination of Data Type Sent through RS 232 Output76
- Minimal Mass Required for Activation of Automatic Printout77
16 Cooperation with a Printer or a Computer78
- Cross-Section through Connecting Conductors79
- Printing Date with Specified Date and Time80
- Cooperation with Statistic Printer Kafka SQS80
- Format of Data Sending81
- Format of Data Sent on Pressing of PRINT Key81
  - Format of Data Sent as Response for Commands Generated from a Computer82
17 Under Hook Weighing83
18 List of Commands Computer - Balance84
19 Error Messages86
20 Additional Equipment87
- Anti-Vibration Table87
- Rack for under Hook Weighing87
- Density Determination Kit (for Solids and Liquids)87
- Additional Display87
- Computer Software88

RADWAG PS Series

Table of Contents

Other manuals for RADWAG PS Series

Related product manuals