Rain Master RME EAGLE - 7.6 MANUAL ET DATA

RME EAGLE User Manual Rain Master Irrigation Systems
Page 94 Chapter 7 ET Key Operations
Press:
The controller will return to the Automatic Mode.
7.6 MANUAL ET DATA
The RME EAGLE controller is capable of reading, processing and storing a manually entered ET
value. The operator entered daily ET value (expressed in inches) is stored and utilized for today’s
station runtime calculations. The manual entry will override any other ET values received or stored
by the controller (i.e. Weather Station Device, Internet received value or the Stored Historical
value).
The manually entered ET value will be used by the controller for today’s runtime calculations and
for the next six (6) days, unless cleared or modified by you.
EXAMPLE: Manually enter an ET value of .30 inches,
Continue to Press: Until display indicates:
NOTE: The ET Data Source display may indicate any source or value
accumulated or received by the controller.
Press: Display will indicate:
NOTE: The ET Data Source display will indicate a data source of
MANUAL. However, the value may be the default value or a
previously stored manual value.
Press: Display will indicate:
Display will then indicate:
ET – M .
PROGRAM
ET
ET-H .13
PROGRAM
MANUAL
3
TUE
0
QUIT
ENTER
OK
PROGRAM
ET –M .30
PROGRAM