RME EAGLE User Manual Rain Master Irrigation Systems
Page 60 Chapter 6 Setup Key Operations
6.0 SETUP KEY OPERATIONS
Usage: The SETUP key is used to enable, disable and configure advanced features of the
RME EAGLE controller. Pressing the SETUP key will sequentially rotate through
the various options and display the next configuration parameter.
If you wish to terminate the Setup process at any point, press the QUIT key to return
to the Automatic Mode.
Table 6 - Setup Options and Controller Defaults
Function Option Default Option
Set Time of Day
Numeric Value,
plus AM or PM 12:00AM
Set Date Numeric Value N/A
Use a Master Valve
Enabled or
Disabled All programs are enabled
Type of Master Valve
Normally Closed
= NC, Normally
Open = NO NC
Pump
Enabled or
Disabled All programs are disabled
Stack Stack, No Stack Stack
Delay (seconds) 0 – 255 000
Security Code 0 – 9999 0000
Rain Sensor
Enabled or
Disabled All programs are disabled
Alarm On, Off On
Cycle and Soak
Enabled or
Disabled All programs are disabled
Odd/Even Watering
Enabled or
Disabled All programs are disabled
Communications Enabling On, Off Off
Flow Sensor Features On, Off Off
SETUP
To Next Page
Loading...
