Rain Master RME EAGLE - 6.7 SECURITY CODE

Rain Master Irrigation Systems RME EAGLE User Manual
Chapter 6 Setup Key Operations Page 67
6.7 SECURITY CODE
The RME EAGLE controller has the capability to enter a pass code which must be entered before
any function(s) can be executed. This code can be up to 4 numbers long. Use a number that can be
easily remembered, and have it written down should you forget.
NOTE: This feature should only be used where security is limited.
EXAMPLE: To enter a new Security Code of 1960, the year you were born,
Continue to Press: Until display indicates: CODE
Press:
Display will indicate:
Press:
NOTE: 0000 is not a valid security code. 0000 means that the security code
feature is disabled.
The controller will return to the Automatic Mode.
6.7.1 Enabling Security Code
Once you have completed operating or making changes to your controller you can enable the
security code.
EXAMPLE: Enable the Security Code feature,
Press:
The controller will return to the Automatic Mode.
SETUP
CODE0000
PROGRAM
1
SUN
9
ENTER
CODE1960
PROGRAM
6
FRI
0
QUIT
MANUAL ENTER ENTER