RME EAGLE User Manual Rain Master Irrigation Systems
Page 48 Chapter 5 Function and Execution Key Operations
NOTE: If Water Percentage Budget is set to a value other than 100 percent, the
watering lengths of all stations in a program will be changed; the modified
station runtime can be viewed using the REVIEW key feature.
NOTE: For a cycle and soak program the Percentage only applies to the runtimes
and not to the maximum watering times or soak times.
EXAMPLE: Set a Water Percentage Budget of 110 percent, this will increase the watering times of
all stations in a program, by 10 percent.
Press:
The controller will return to the Automatic Mode.
EXAMPLE: To clear a Water Percentage Budget,
Press:
The Water Percentage Budget is reset to 100 percent and the controller will return to the Automatic
Mode.
EXAMPLE: To review the Water Percentage Budget,
Press:
Press:
The controller will return to the Automatic Mode.
NOTE: Percent calculations which result in fractional portions of minutes will
irrigate for the precise time. For example, assume a 5 minute runtime with
a percentage of 50 percent. This station will irrigate for 2 minutes and 30
seconds.
ATER %
BUDGET
1
1
ENTER
ATER %
BUDGET
CLEAR
ATER %
BUDGET
QUIT