Rain Master RME EAGLE - Page 64

Rain Master Irrigation Systems RME EAGLE User Manual
Chapter 5 Function and Execution Key Operations Page 57
8. Stations and their associated runtimes are displayed. The STATIONS are displayed in the
STATIONS/DAYS display and the runtimes are displayed in the PROMPT/MESSAGE
display. If the program is a Cycle and Soak program (selected using SETUP), the maximum
watering time and soak time will also be displayed for each station.
(CONVENTIONAL PROGRAM)
(CYCLE AND SOAK PROGRAM)
NOTE: The runtime shown for each station is the adjusted runtime length
and will be changed by the value you may have set for the
percentage adjusts function. If the program is ET based, then the
station runtimes are the times calculated by the controller.
Press:
The controller will return to the Automatic Mode.
EXAMPLE: To review all program parameters of program number three (3) only,
Press:
Continue to Press:
Press:
The controller will return to the Automatic mode.
STATIONS
PROGRAM
1 12- :15
PROGRAM
RUNTIME
PROGRAM
3 27- :10
PROGRAM
MAX TIME
PROGRAM
3 27- 0:02
PROGRAM
SOAK TIME
PROGRAM
3 27- 0:01
PROGRAM
QUIT
PROGRAM ENTER
REVIE
W
QUIT
3
TUE