Raisecom ISCOM2600 (B) Series User Manual

Raisecom
ISCOM2600 (B) Series Product Description
2 System structure
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
37
Figure 2-42 Wiring of the 1000 Mbit/s crossover cable
Technical specifications
Table 2-16 lists technical specifications of the Ethernet cable.
Table 2-16 Technical specifications of the Ethernet cable
Parameter
Description
Name
CBL-ETH-RJ45/RJ45-D
Connector
RJ45 crystal header
Model
Cat 5 or better UTP (UTP-5 or UTP-5e) or Cat 5e STP cable
Number of cores
8
Length
The letter D is the length, which can be customized. For example, if
the customer requires 2-meter cables, you can name it CBL-ETH-
RJ45/RJ45-2m.
2.6.3 Ground cable
Introduction
The ground cable is used to connect the ISCOM2600 series switch to the ground.
Appearance
The ground cable is composed of ground terminals and the coaxial cable. The ground terminal
is usually an OT non-insulated terminal. The coaxial cable is a yellow/green copper soft

Raisecom ISCOM2600 (B) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600 (B) Series
Category	Switch
Language	English