R&S SMW200A - Page 112

Instrument Control
R&S
®
SMW200A
112Getting Started 1412.9220.02 ─ 21
5. Use the default mode, that is "Execution Mode > Interactive".
6. Tap on the "Start" button.
7. Observe the information displayed in the "Info" line (bottom of the display).
1 = Information on the performed action
2 = Progress bar
3 = "Next Step": confirms the execution of the step
4 = "Stop": terminates the tutorial
8. To execute a subsequent step, select the "Next Step" button.
A blinking cursor indicates the block or parameter affected by the step.
Getting Information and Help