R&S SMW200A User Manual

System Overview
R&S
®
SMW200A
89Getting Started 1412.9220.02 ─ 21
7.1.7 I/Q Modulator ("I/Q Mod" Blocks)
The "I/Q Mod" blocks represent the I/Q modulators.
These functional blocks are the access point to:
●
The I/Q modulation of the internal baseband signal
●
The I/Q modulation of an external analog wideband signal (single ended or
differential)
●
The analog I/Q impairments
7.1.8 Analog I/Q Output ("I/Q Analog" Blocks)
The "I/Q Output" block represents the analog I/Q output connectors.
This block is the access point to the settings of:
●
The analog I/Q output signals
The generated signal can be output as single ended or differential analog sig-
nal.
●
The analog I/Q impairments
7.1.9 RF and Analog Modulations ("RF" Blocks)
The "RF" block represents the RF settings of the instrument.
This block is the access point to:
●
RF frequency and level settings, as well as the reference frequency, local
oscillator, user correction, etc.
●
The analog modulations
●
The list and sweep modes
Brief Introduction to the Instrument's Concept

R&S SMW200A Specifications

General

Brand	R&S
Model	SMW200A
Category	Portable Generator
Language	English