To Next Page

To Previous Page

Preparing for Use

R&S

SMW200A

15Getting Started 1412.9220.02 ─ 21

4 Preparing for Use

● Putting into Operation..................................................................................... 15

● Connecting USB Devices................................................................................24

● Setting Up a Network (LAN) Connection.........................................................25

4.1 Putting into Operation

This section describes the basic steps to be taken when setting up the R&S SMW

for the first time.

Risk of injury due to disregarding safety information

Observe the information on appropriate operating conditions provided in the

data sheet to prevent personal injury or damage to the instrument. Read

and observe the basic safety instructions provided with the instrument, in

addition to the safety instructions in the following sections. In particular:

●

Do not open the instrument casing.

Risk of instrument damage due to inappropriate operating conditions

Specific operating conditions are required to ensure accurate measure-

ments and to avoid damage to the instrument. Observe the information on

appropriate operating conditions provided in the basic safety instructions

and the instrument's data sheet.

Putting into Operation

R&S SMW200A User Manual

Questions and Answers: