R&S SMW200A - Applications Examples of the R&S SMW

System Overview
R&S
®
SMW200A
90Getting Started 1412.9220.02 ─ 21
7.2 Applications Examples of the R&S SMW
Due to its modular design, the R&S SMW can be optimally adapted to the
requirements of different applications:
●
Generation of digitally modulated signal
The main field of application of the R&S SMW is the generation of digitally
modulated signals. The R&S SMW generates a digitally modulated signal in
several ways: using the internal baseband generator, using the externally
applied digital baseband signals or in an analog wideband I/Q operation.
●
Generation of test signals for diversity tests and MIMO scenarios
The R&S SMW enables you to generate test signals in versatile MIMO config-
uration for which several signal generators were previously required.
●
Generation of a wanted signal and an interfering signal for receiver tests
●
Addition of real-time signals of different standards, for example EUTRA/LTE
and 3GPP FDD
●
Generation of signals with up to 2 GHz signal bandwidth, for example for
WLAN IEEE 802.11ad signals
●
Generation of fading scenarios, e.g for test setups involving R&S SMW and
R&S
®
CMW
A few examples are given in the following.
Applications Examples of the R&S SMW