Instrument Tour
R&S
®
SMW200A
32Getting Started 1412.9220.02 ─ 21
Risk of touchscreen damage
Inappropriate tools or excessive force can damage the touchscreen.
Observe the following instructions when operating the touchscreen:
●
Never touch the screen with ball point pens or other sharp objects, use
your fingers instead.
As an alternative, you can use a stylus pen with a smooth soft tip.
●
Never apply excessive force to the screen. Touch it gently.
●
Never scratch the screen surface, for example with a finger nail.
●
Never rub the screen surface strongly, for example with a dust cloth.
For instructions on cleaning the screen, see the Maintenance chapter in
the R&S SMW user manual.
5.1.2 Keys
5.1.2.1 Utility Keys
The utility keys cause the R&S SMW to return to a defined instrument state and
provide information on the instrument and assistance.
For more information, refer to chapter "General Instrument Functions" in the user
manual.
Table 5-1: Utility keys
Utility Key Assigned functions
[PRESET] Sets the instrument to a defined state
[SAVE/RCL] Saves and loads instrument setting
Accesses the file manager
[LOCAL] Switches from remote control to local (manual) control
[SETUP] Accesses the general instrument settings
[HCOPY] Opens the "Hardcopy" dialog for storing the current display in a file
[INFO] Displays status messages, error messages, and warnings
[HELP] Displays context-sensitive help text
Front Panel Tour
To Next Page
Loading...
