en-104
10 QUALITY OF CUT
Do a “test-cut” to measure the performance of the
mower before you begin the repairs.
An area must be available for “test cuts.” Use this area
to give a base line with which to measure the mower
performance.
When the work is completed, repeat the “test-cut” to
check the mower performance.
The following items must be checked to make sure of
an accurate “test cut.”
1. Mowing (ground) speed.
2. Blade sharpness.
3. Height of cut (HOC).
4. Roller and roller bearing condition.
5. Blade speed.
6. Check belt adjustment.
10.1 QUALITY OF CUT PROBLEM SOLVING __________________________________
To Next Page
Loading...
