Ransomes HM600 - Cut; Ehicle Speed; Nactive; Menu

en-39
5 CONTROLS
5.2.Z.44 CROSS CUT _____________________________________________________
Select cross cut  and accept
5.2.Z.45 CROSS CUT ACTIVE / INACTIVE ____________________________________
Use the button up and down to move between cross cut active and not
active.
Press the button .to accept.
Press the button to return to previous menu.
5.2.Z.46 VEHICLE SPEED _________________________________________________
Select the vehicle speed  and accept
5.2.Z.47 MAXIMUM SPEED SETTINGS MENU _________________________________
Use the button up and down to move
between transport and mow speed and creep
speed.
Press the button .to accept.
Select which transport and mow speeds are
needed in forward and reverse.
Use the button up and down to move to
the needed speed.
Press the button .to save.
Press the button to return to previous menu.
Do the procedure for creep mode.
Cross Cut
Cross Cut active

Pin Menu
Cruise Control

Cross Cut
Vehicle Speed
Change PIN
Pin Menu
Cruise Control
Cross Cut

Vehicle Speed
Change PIN
Max Speed Settings Menu
Transport and Mow Speed
Creep Speed

Max Speed Menu
Transport

FW 24 km/h
RVS 8 km/h
Mow FW 11 km/h
RVS 8 km/h