Ransomes HM600 - Unit ) Monitor Input; (J1939); One

en-34
5 CONTROLS
5.2.Z.28 ECU (ENGINE CONTROL UNIT) MONITOR (J1939)_______________________
Select the ECU Monitor  and accept
5.2.Z.29 SERVICE MANAGER PIN INPUT______________________________________
Press the button up and down to change the numbers.
Select . to accept.
Initial PIN number is 1001
Note. Service managers are advise to change the pin to stop the machine
parameters being changed to an dangerous condition.
5.2.Z.30 ECU MONITOR INFORMATION (J1939) ________________________________
Select the J1931 information  and accept
5.2.Z.31 INFORMATION SCREEN ONE________________________________________
This screens displays, engine speed (rpm), engine throttle position (%),
engine coolant temperature (°C) and battery voltage (Volt).
Press the button up and down to move between screen one and two.
Service Menu
Fault Log
Time Until Service
Diagnostics
I/O Diagnostics

J1939 Info
Insert PIN
0000
°C
Volt
rpm
%
Engine Speed
Engine Throttle Position
Engine Coolant Temp
Battery Voltage
2000
65
80
11.8
J1939 Menu

J1939 Information
J1939 Reserved