en-126
12 SPECIFICATIONS
12.6 NOISE ____________________________________________________________
When the machine was tested for sound pressure (Operator Ear).
The Machinery Safety Directive 2006/42/EC
And
Exposure Of Workers To The Risks Arising From Physical Agents (Noise) Directive 2003/10/EC
By compliance to:
The Lawnmower Standard BS EN ISO 5395:2013
And
Sound Pressure Standard EN ISO 3746: 2010
ROPS machine: Measured Sound Pressure 86.9 dB(A) ± 1.28 LWA
Cab machine: Measured Sound Pressure 80.8 dB(A) ± 1.28 LWA (Best case, windows c
losed)
Cab machine: Measured Sound Pressure 85.2 dB(A) ± 1.28 LWA (Worst case, windows open)
When the machine was tested for sound power (Noise in the Environment).
The Machinery Safety Directive 2006/42/EC
And
Noise Emission In The Environment By Equipment For Use Outdoors
Directive 2000/14/EC
By compliance to:
Sound Power Standard EN ISO 3744:2010
Measured Sound Power 103 dB(A) ± 1.28 LWA
12.7 SLOPES ____________________________________________________________
DO NOT USE ON the SLOPES GREATER THAN 16° HM600 with ROPS.
DO NOT USE ON the SLOPES GREATER THAN 15° HM600 with Cab.
The slope was calculated using static stability measurements according to the requirements of BS EN ISO
5395:2013.
12.8 CUTTING PERFORMANCE ____________________________________________
3.2 m (10ft 5in) width of cut.
3.46 hectares/hr. At 12 kph.
8.5 acres / at 7.44mph
(10% allowance is included for normal overlaps and turning at the end of each cut).
To Next Page
Loading...
