Ransomes HM600 - Menu; Pin; Control; Select

en-38
5 CONTROLS
5.2.Z.40 PIN MENU ________________________________________________________
Select the PIN menu  and accept
5.2.Z.41 INPUT PIN________________________________________________________
Press the button up and down to change the numbers.
Select . to accept.
Owner PIN: 1001
Owners should change PIN to protect settings.
5.2.Z.42 CRUISE CONTROL ________________________________________________
Select cruise control  and accept
5.2.Z.43 CRUISE SELECT __________________________________________________
Select between “mow mode, not enabled”, use button up and down to
move between them.
Press the button .to accept.
Press the button to return to previous menu.
Pin Menu

Cruise Control
Cross Cut
Vehicle Speed
Change PIN
Inclinometer
Set Default Parameters
Drive Modes
Fan Drive
Insert PIN
11
Settings Menu
Mode
Measure Units

PIN
Cruise Menu
Mow Mode
Not Enabled
