en-65
ADJUSTMENTS 7
7.5 HEIGHT OF CUT ADJUSTMENT _______________________________________
WARNING
Tools MUST not come into contact with the ground, any contact with the ground could result in stones
or other material not being held back safely by the stone impact protection. Persons outside of the
hazard area could be injured by ejected material.
WARNING
The adjustment plate must always be secured with two bolts. If the adjustment plate is only secured
with one bolt, the working depth could change by itself and the tools could come into contact with the
ground. Persons outside of the hazard area could be injured by ejected materials.
CAUTION
Always inspect the cutting units before use to ensure that the front stone impact
protection device is parallel to the ground before use.
To Next Page
Loading...
