Raspberry Pi Pico User Manual

Windows
Download and install PuTTY
https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
Open Device Manager and locate Picoprobe’s COM port number. In this example it is COM7.
Open PuTTY. Select Serial under connection type. Then type the name of your COM port along with 115200 as the
speed.
Select Open to start the serial console. You are now ready to run your application!
Getting started with Raspberry Pi Pico
Using Picoprobe’s UART 63

Raspberry Pi Pico Specifications

General

Microcontroller	RP2040
Clock Speed	133 MHz
SRAM	264 KB
Flash Memory	2 MB
GPIO Pins	26
Operating Temperature	-20°C to +85°C
Architecture	ARM Cortex-M0+ (dual-core)
Interfaces	I2C, SPI, UART, PWM
Operating Voltage	1.8–5.5 V
Dimensions	51 mm × 21 mm