Raspberry Pi Pico User Manual

Setting common fields from CMake
You can also set fields directly from your project’s CMake file, e.g.,
pico_set_program_name(foo "not foo") ①
pico_set_program_description(foo "this is a foo")
pico_set_program_version_string(foo "0.00001a")
pico_set_program_url(foo "www.plinth.com/foo")
1. The name "foo" would be the default.

NOTE
All of these are passed as command line arguments to the compilation, so if you plan to use quotes, newlines etc.
you may have better luck defining it using
bi_decl in the code.
Getting started with Raspberry Pi Pico
Binary Information 73

Raspberry Pi Pico Specifications

General

Microcontroller	RP2040
Clock Speed	133 MHz
SRAM	264 KB
Flash Memory	2 MB
GPIO Pins	26
Operating Temperature	-20°C to +85°C
Architecture	ARM Cortex-M0+ (dual-core)
Interfaces	I2C, SPI, UART, PWM
Operating Voltage	1.8–5.5 V
Dimensions	51 mm × 21 mm