11
QUICK START MACHINE CONFIGURATION
NOTE: The Quick Start option only allows the operator to create basic
guidance lines. For additional functionality, select the Create Detailed
Machine Configuration option during the initial set up.
1. Select Quick Start . The Machine Configuration: Quick Start window
will be displayed.
2. Enter the desired Guidance Width in feet (meters).
NOTE: The Guidance Width is the width of the implement and that will be
“painted” to display previous area covered during a field operation. This
measurement is used for creating swath widths for guidance lines and is
crucial for most field applications.
3. Press Accept . The End User License Agreement prompt will be displayed.
4. Review the information in the End User License Agreement and select OK. The
Warning prompt will be displayed.
5. Read and acknowledge the information on the Warning window. The Home
screen (see Figure 5 on page 12) will be displayed and the CRX system is ready for
in-field operations.
NOTE: Press the Settings button at any time it is visible to return to the
Settings screen.
DETAILED MACHINE CONFIGURATION
A detailed machine configuration allows the user to enter detailed machine and
implement measurements for optimized guidance for specific equipment types (e.g.
self-propelled sprayer versus towed planter behind an articulated tractor) and
additional guidance features.
Refer to the Machine Configuration section on page 18 for additional information
regarding setting up detailed machine configurations.
To Next Page
Loading...
Need help?
General
