62
7. If desired, press the About tab to view information about the CRX
including the software version, when the software version was installed, Run
Hours, and Total Run Hours. If desired, press Erase Data to reset the system and
erase all data stored on the CRX. This includes all implements, Grower/Farm/Field
data, and settings on the CRX.
8. After adjusting all the settings, press Accept .
SMARTRAX SYSTEM INFORMATION
The SmarTrax System Information page provides options for adjusting sensitivity,
performing diagnostics, and general SmarTrax information. For SmarTrax operation
and calibration information, refer to the appropriate SmarTrax Calibration and
Operation Manual.
IMPLEMENT STEERING SYSTEM INFORMATION
The Implement Steering Information page provides options for adjusting sensitivity,
performing diagnostics, and general Implement Steering information. For Implement
Steering operation and calibration information, refer to the appropriate Implement
Steering Calibration and Operation Manual.
FEATURE UNLOCKS
Some CRX features are locked, or temporarily unlocked, when shipped. These
features include:
• VRA: Allows the operator to assign a prescription map to a product control
channel to automatically apply the desired product as configured in the
prescription map.
• Multi-VRA: Allows multiple prescription maps per job.
• Task Controller: Task controller is required to allow the CRX UT to automatically
control sections based on field position and previous coverage data collected
during the application.
To Next Page
Loading...
Need help?
General
