41
FIGURE 21. AB Guidance Line Recording
4. When done recording, press the next point (in this case it will be B).
5. Select Accept to complete the line.
6. Select the guidance line icon along the right side of the screen.
7. Select the Edit next to the newly created line. The Edit Guidance Line window
will open.
8. Enter a name for the guidance line.
9. Press Accept . If desired, select Delete to delete the guidance line.
10. When in a job, select Load to load and use an existing guidance line.
Starting
Point
End Point
Flashing
Light
To Next Page
Loading...
Need help?
General
