CHAPTER 11
104 Raven RS1™ and RS Lite™ Calibration and Operation Manual
FIGURE 32. Software Installation in Progress
DIAGNOSTIC TROUBLE CODES (DTC)
FIGURE 33. Diagnostic Trouble Codes Page
The Diagnostic Trouble Code page displays active and past diagnostic trouble codes (DTCs) that occur during RS1
system operation. Active DTCs must be fixed before the RS1 system can be enabled for guidance and steering
operation. Once a DTC has been corrected, the code moves to the inactive DTC code list. Refer to Figure 3 for an
example of DTCs and DTC summaries.
To Next Page
Loading...
