CHAPTER 2
8 VSN® Operation Manual
CAMERA MOUNTING RECOMMENDATIONS
The settings for camera angle and camera height may affect the accuracy of the camera measurement and the
row recognition quality.
The settings in the following table are recommended minimum and maximum camera mounting heights.
Minimum heights mean the lowest possible camera height required to cover at least three rows in the field of view.
For row spacings between 4.92 in [12.5 cm] to 39.37 in [100 cm], which are not given in the table below, the camera
height can be interpolated.
TABLE 4.
Camera Mounting Height
CARE AND MAINTENANCE
GLASS CARE AND CLEANING
• Avoid pressure washing the camera lens.
• Use any glass cleaning products with a soft cloth. Avoid any abrasive products that could scratch or damage
the glass.
RADAR SENSORS
• If the system does not allow the operator to engage while using radar sensors, use a rag or cloth to clean the
radar sensors and allow for better solution quality.
Row Spacing Camera Height (min-max)
4.92 in [12.5 cm] 19.69 in [50 cm] - 39.37 in [100 cm]
5.91 in [15 cm] 19.69 in [50 cm] - 39.37 in [100 cm]
7.87 in [20 cm] 19.69 in [50 cm] - 39.37 in [100 cm]
9.84 in [25 cm] 23.62 in [60 cm] - 39.37 in [100 cm]
11.81 in [30 cm] 23.62 in [60 cm] - 39.37 in [100 cm]
12.99 in [33 cm] 27.56 in [70 cm] - 39.37 in [100 cm]
14.76 in [37.5 cm] 31.5 in [80 cm] - 44.3 in [112.5 cm]
19.69 in [50 cm] 39.37 in [100 cm] - 59.1 in [150 cm]
29.53 in [75 cm] 59.1 in [150 cm] - 88.59 in [225 cm]
39.37 in [100 cm] 70.87 in [180 cm] - 118.11 in [300 cm]
*Based on 45° Mounting Angle
To Next Page
Loading...
