Diagnostics: System Information 43
DIAGNOSTICS
FIGURE 2. Sensor Updates Page
4. To update the VSN radar sensors
• Select the Reprogram All button to update all radar sensors connected to the VSN guidance
system.
• Select the Reprogram Selected button to update the radar sensor which is shown in the Select
Hardware field at the top of the page.
SOFTWARE UPDATE
Select the Update Software button at the bottom of the page to update the software version on the VSN system.
FIGURE 3. Software Download Page
The current software version installed on the VSN system is displayed along with any available OTA (Over the Air)
updates.
NOTE: VSN may be updated with a USB drive via the field computer or UT. An OTA update may be
completed with an Internet connection either via WiFi or Ethernet.
Refer to the CAN Node Update process in the field computer manual and ensure WiFi is enabled on
the field computer.
To Next Page
Loading...
