Operation: VSN® Operation Widgets 29
OPERATION
VSN® STATUS WIDGET
The VSN Status widget allows the operator to quickly check the current status of the VSN system during operation.
NOTE: Machine roll is displayed on the VSN Status widget.
Refer to Diagnostic Trouble Codes Tab section on page 47 for additional status conditions which may
be displayed in the VSN on-screen widget.
ROS Widget
Description
Vision Radar
VSN requires calibration.
No A-B path or guidance line has been set,
solution quality is below minimum threshold,
or an active DTC is preventing the VSN system
from engaging.
VSN is detected and ready.
VSN solution quality is nearing minimums.
While in a caution state, the system may be
engaged, but system performance may be
impacted.
To Next Page
Loading...
