CHAPTER 5
40 VSN® Operation Manual
T1 ETHERNET SETTINGS
To review or change the T1 Ethernet settings:
1. From the VSN home page, select the Tools button.
2. Select the System Settings tab.
3. Select the T1 Ethernet Settings button. The following settings and options will be displayed.
FIGURE 13. T1 Server and Client Mode Pages
Raven Field Computer (Server Mode). Allows other devices to connect to the VSN.
Field Hub (Client Mode). Allows the VSN to connect to another device via wireless Internet.
Device IP Address. Displays the IP address the VSN has received (via Field Hub) or the IP address of the VSN
broadcast (via Server Mode).
Link Speed. Displays the fastest data rate for all devices connected via Ethernet cable. The value is measured in
megabits per second (MB/s).
System
Settings
T1 Ethernet
Settings
Tools
To Next Page
Loading...
