CHAPTER 3
12 VSN® Operation Manual
REAR BOOM SPRAYERS
1. Use the Machine Type drop down list to select the Rear Boom Sprayer option.
2. Use the Machine Make and Model drop down lists to select your machine.
NOTE: If your machine make or model is not listed, select the Generic option.
3. Measure the height of the camera lens to the bottom of the furrow.
4. Use the on-screen keypad to enter the camera height.
FIGURE 1. VSN Camera Height
5. Select the Next button.
6. Next, measure and enter the distance from the rear axle of the vehicle to the camera lens.
NOTE: A positive value means the camera is located in front of the rear axle.
FIGURE 2. VSN Camera Fore/Aft Position
To Next Page
Loading...
