VSN® System Settings and Tuning: Network Settings Tab 39
VSN® SYSTEM SETTINGS AND TUNING
ETHERNET SETTINGS
Touch the Ethernet Settings button to review the IP address assigned to the VSN system and the current link
speed.
FIGURE 11. Ethernet Settings Page
WIFI SETTINGS
To change WiFi or wireless communication settings:
1. From the VSN home page, select the Tools button.
2. Select the System Settings tab.
3. Select the WiFi Settings button to review all WiFi Networks available to the VSN system. The network to which
VSN is currently connected will be displayed with a green check mark next to the name.
Mode. Use the Mode drop-down option to select Raven Auto or Manual. Raven Auto will allow VSN to
automatically connect with a compatible Raven device.
If a compatible Raven device is not available, select Manual from the Mode drop down list to display a list of
available WiFi networks. The network to which VSN is currently connected will be displayed with a green check
mark next to the name.
FIGURE 12. Wifi Settings Page
System
Settings
WiFi Settings
Tools
To Next Page
Loading...
