Calibration Wizard: Camera and Equipment Calibration 19
CALIBRATION WIZARD
4. Enter the offset from the center of the tire to the radar sensor lens.
FIGURE 13. Radar Sensor Offset Page
5. Select the Next button.
CALIBRATION SUMMARY
1. The Calibration Summary page will be displayed after all camera and machine settings have been entered.
FIGURE 14. VSN Machine Calibration Summary
2. To complete the Machine Calibration and save the displayed settings, select the check mark button.
3. Proceed to the Row Spacing Preset Calibration section on page 20 to continue with the calibration wizard.
To Next Page
Loading...
