Calibration Wizard: Row Spacing Preset Calibration 21
CALIBRATION WIZARD
FIGURE 16. VSN Row Spacing
4. Select the Next button.
5. Review the calibration instructions on-screen before selecting the Start button to begin the calibration.
FIGURE 17. Begin VSN Camera Calibration
6. Drive down the row while steering the machine manually. Drive at a speed of 5 to 10 mph [8 to 16 km/h]. After
approximately 100 yards [91 m], the calibration process will be complete.
NOTE: The VSN camera needs to be calibrated in a flat field with straight rows. A good calibration is
extremely important to good steering performance.
A better calibration may be achieved at 8 to 10 mph [13 to 16 km/h] than at 5 to 6 mph [8 to 9.5 km/
h].
To Next Page
Loading...
