Service Manual Rayjet
Adjusting the Mini-Manager Options
Tab „Information“ – Firmware Update
07/09/2010 Trotec Produktions- und Vertriebs GmbH_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support 23 / 53
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto: rayjet@troteclaser.com www.rayjetlaser.com
5.3 Tab „Information“ – Firmware Update
Engraver shows the model actually connected to the computer.
Power shows the power of the laser tube in W.
Firmeware shows the actually installed firmware version of the laser machine. To update the
firmware follow the following steps:
1. click on the button “Update Firmware”.
To Next Page
Loading...
