4.1 Measuring the laser power:
To measure the laser power you need:
1. laser protection glasses (for CO
2
lasers) part number 69300
2. Laser power meter
CAUTION To make sure that there is no laser emission out of a controlled area
establish a limited access area by using non flamable beam blocking curtains,
temporary walls or other enclosures.
CAUTION The laser power measurement may only be performed by service
technichians that have been trained by Trotec and are familiar with the hazards from
lasers
CAUTION
Never expose any part of your body to the beam as this could result in serious
injuries.
CAUTION
To do the laser power measurement it is absolutely necessary to wear
laser protection glasses.
To Next Page
Loading...
