RT-7200 Auto Hematology Analyzer User’s Manual
“Send” button, open transfer dialog box as follows:
Fig.6-3 Data transfer
Select data to send, click “send”.
z Search
Search function allows user to search required record according to designated condition,
click “Search” button, open search dialog box as follows:
Fig.6-4 Search condition
Sample no. is the only identification of history record. If input sample no., other
conditions are disabled. User can use one or multiple condition to retrieve, input
message, click “OK”, if there is compliant record, it will be shown in history record list. If
there is no compliant record, the system will give a message.
z Delete
Delete function can be used to delete selected data and all history data. Data can be
selected in following methods: a) use select function. b) Use mouse to click list column,
select one history data. Using keyboard Ctrl key or Shift key, multiple columns can be
selected. If no data are selected, the system will prompt to delete all sample data.
z Print
Print function prints selected history data according to system setting print mode. See
print setting in Chapter 7 “System Setting”.
z Detail
“Detail” function is used to check detail data message of a certain sample, select one
record in history list, click “Detail” button, and go to Sample Detail Message Review
menu as follows:
34
To Next Page
Loading...
