RT-7200 Auto Hematology Analyzer User’s Manual
z If the hands or skins are touched with the reagents, they shall be immediately
washed to be clean using a large amount of clear water.
z The waste products such as used test tubes, other instruments and consumables,
etc shall be appropriately handled as the medical waste products or infectious
waste products. If the pollution is caused by bloods, the infection might be
generated by pathogens.
z Take proper protection while replacing reagent
Voltage, connection and grounding of power supply
z The power supply and grounding environment of this instrument are assured to
be good and stable.
z The plug of the power supply shall not be inserted into the power socket which is
not available for the voltage requirement stated in the backplate of instrument, or
the misfire or electric shock might be caused.
z When the instrument is installed, the power supply cable and adapter as
accessories attached to the machine must be used and the good grounding shall
be assured, or the misfire or electric shock might be caused.
z DO NOT damage the insulation protection skins of the power cord. DO NOT pull
the power cord with efforts or hang heavy articles on it, or the short circuit or
open circuit might be caused.
z When the peripherals are connected, the power supply must be first cut off, or
the short circuit or open circuit might be caused.
z Do not open the side cover or panel while instrument is on, all it may cause
damage to some sensitive parts.
For safety purpose, users are not allowed to refit the instrument.
5
To Next Page
Loading...
