10
razberi™ Technologies
7. Tab through the remaining fields. Click Ok.
8. Click Close.
9. Connect the Uplink port on the razberi™ to the client PC, or to a switch.
10. Insert the razberi™ power cable into an available power outlet following the safety guidelines. Allow 3-5
minutes.
11. Use the razberi™ Utilities CD (included in the razberi™ package) to install the client software. To install the
client software without the Utilities CD, access http://192.168.9.1/razbericlient
(http://ipaddress/razbericlient)
from within a browser web page and follow the installation process. (See figure 6)
Figure 6
To Next Page