EasyManua.ls Logo

RC GROUP MP2000 - Page 107

RC GROUP MP2000
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
107
RC GROUP - 149_ItEn.0102
MP2000 AIR CONDITIONERS
Software per condizionatori d'aria a pompa di calore e Roof Top EPROM CPX....
Software for heat pump air conditioners and Roof Top
ELENCO SETS MANUALI
Con questa funzione è possibile selezionare la tipologia di
funzionamento dei seguenti componenti e funzioni:
COOLING 1
COOLING 2
HEATPUMP 1
HEATPUMP 2
HEATER
HUMIDIFICATION
VALVE COOLING (0
÷10V)
VALVE HEATING (0
÷10V)
DISABLE HUMIDIFIER
MANUAL DRAIN
Per i dettagli operativi fare riferimento al capitolo COMAN-
DI MANUALI.
ELENCO MEMO
Con questa funzione vengono memorizzati gli allarmi inter-
venuti, le ore di funzionamento e gli avviamento dei com-
ponenti:
ALARM HISTORY
MAIN FAN (h)
COMPR. 1 (h)
COMPR. 1 (Avviamenti)
HEATER (h)
COMPR. 2 (h)
COMPR. 2 (Avviamenti)
HUMIDIF. (h)
HEATPUMP 1 (h)
HEATPUMP 2 (h)
COMPR 1 (h) e COMPR 2 (h) indicano le ore di funziona-
mento totali dei compressori (somma delle ore di raffredda-
mento più quelle di riscaldamento).
HEATPUMP 1 (h) e HEATPUMP 2 (h) indicano le ore di
funzionamento dei compressori in solo riscaldamento.
Per i dettagli operativi fare riferimento al capitolo CONTA-
ORE E ALLARME MAINTENANCE.
LIST OF MANUAL SETS
This function allows the selection of the operating typology
for the following components and functions:
COOLING 1
COOLING 2
HEATPUMP 1
HEATPUMP 2
HEATER
HUMIDIFICATION
VALVE COOLING (0
÷
10V)
VALVE HEATING (0
÷
10V)
DISABLE HUMIDIFIER
MANUAL DRAIN
For any operating details, see chapter MANUAL PROCE-
DURE.
MEMO LIST
This function stores the intervened alarms, the running
hours and the start-up of the components:
ALARM HISTORY
MAIN FAN (h)
COMPR. 1 (h)
COMPR. 1 (start-up)
HEATER (h)
COMPR. 2 (h)
COMPR. 2 (start-up)
HUMIDIF. (h)
HEATPUMP 1 (h)
HEATPUMP 2 (h)
COMPR 1 (h) and COMPR 2 (h) indicate the total running
hours of compressors (by adding the cooling hours to the
heating hours).
HEATPUMP 1 (h) and HEATPUMP 2 (h) indicate the
running hours of compressors during heating.
For any operating details, see chapter HOURMETER AND
MAINTENANCE ALARM.

Table of Contents